ข่าวประชาสัมพันธ์

มาร่วมเป็นกำลังใจให้เว็บด้วยการสมัครสมาชิกวีไอพี ~~ เลือกปีที่ท่านต้องการได้โดยไม่ต้องเรียงปี ~~ ปีละ 350 บาท สมัคร 2 ปีลดเหลือ 600 บาท ~~ มีไลน์กลุ่ม VIP จำนวนหลายร้อยท่าน เอาไว้ปรึกษางานซ่อม ~~ เข้าถึงข้อมูลด้านเทคนิค ข้อมูลเชิงลึกมากมาย.....


ผู้เขียน หัวข้อ: UPA USB V1.3 Programmer English With Full Adaptors With Nec Function  (อ่าน 1648 ครั้ง)

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

ออฟไลน์ Auto Man

  • Administrator
  • หัวหน้าศูนย์ซ่อมสร้าง
  • *****
  • เจ้าของกระทู้
  • Joined: ก.ย. 2558
  • กระทู้: 37146
  • สมาชิกลำดับที่ : 1
  • เพศ: ชาย
  • มือผู้ให้ย่อมสูงกว่ามือผู้รับ
    • เว็บชุมชนคนรักช่างยนต์
    • อีเมล์
UPA USB V1.3 Programmer English With Full Adaptors With Nec Function
« เมื่อ: 01 กุมภาพันธ์ 2560, 20:15:27 »
  • ขึ้นบน
  • ลงล่าง
  • V1.3 UPA USB Programmer English With Full Adaptors With Nec Function

    Description:

    Language: English.
    Hardware Version:  V2014
    Software Vesion: V1.3


    New Upa-usb is the full set with all adapters, The main Device can be directly connected to the Elrasoft.com UUSP (UPA-USB Serial Programmer) or by an optional DB9 male / female 1:1 extension cable. It's equipped with an 40pin ZIF Socket for all narrow and wide DIP / DIL devices as well as with a 16 pin SOIC ZIF (150mil, narrow) socket to cover most commonly used devices.


    ตรงนี้มีภาพ! แต่ท่านจะมองไม่เห็น , ท่านต้อง  สมัครสมาชิก หรือ ลงชื่อเข้าระบบ

    « แก้ไขครั้งสุดท้าย: 11 กุมภาพันธ์ 2560, 12:04:11 โดย Auto Man »
    สวัสดีคุณ...ผู้เยี่ยมชม  กด ❤ ถูกใจโพสท์นี้ หรือยัง...
    ต้องการสมัครสมาชิก VIP สมัครได้ที่นี่...   หรือทาง Line ID: k.sonchai

    ออฟไลน์ Auto Man

    • Administrator
    • หัวหน้าศูนย์ซ่อมสร้าง
    • *****
    • เจ้าของกระทู้
    • Joined: ก.ย. 2558
    • กระทู้: 37146
    • สมาชิกลำดับที่ : 1
    • เพศ: ชาย
    • มือผู้ให้ย่อมสูงกว่ามือผู้รับ
      • เว็บชุมชนคนรักช่างยนต์
      • อีเมล์
    V1.3 UPA USB Programmer English With Full Adaptors With Nec Function
    « ตอบกลับ #1 เมื่อ: 01 กุมภาพันธ์ 2560, 20:16:24 »
  • ขึ้นบน
  • ลงล่าง
  • Device configuration is done over special config keys which make the work convenient and safe compared to wiring up all manually.

    Additional packages can be covered by commonly available Adapters plugged into the 40 pin ZIF socket.

    The main Device further includes a 10 pin ISP connector where the included ISP Adapters can be connected using a standard 1:1 flatribbon cable (included). The included PLCC ISP Adapters are to be put directly over the soldered chip of the target device making the work convenient and safe compared to soldering or using clips connecting up all manually. (Power from the UUSP to the ISP target can be enabled or disabled by a jumper next to the 10 pin ISP connector)

    UPA-USB Device Programmer V1.3 Update Info:

    Added MC9S12HY64/HA32 support

    Added Serial Flash memory support: A25L512/010/020/040/080/016/032, SST25VF512A/010A/020B/040B/080B/016B/032B, S25FL004A/008A/016A/032A/064A
    Added 24C1024, 24C1025 support
    Added Bulk erase data memory to PICs 16F913-7/946, 12F629/675
    Added script function GetPage
    Added script function AutoBaudRateDevice (hc08 devices only)
    Added script function GetProgrammerFrameChildCtrl( AChildCtrlName: string): TControl
    Added script function EnablePicMemoryAreas ( AProgram, AID, AConfig, ACalibration, AEEPROM: boolean ): boolean;
    Fixed bug with script functions ProgramDevice, ReadDevice ... when used with PICs
    Fixed bug with SetHC08SecurityBytes (SecBytes: string) function
    Fixed bug with 68hc11 reading if Oscillator is not set to Auto
    Updated script example files
    The software is digitally signed
    USB driver upausb.sys is digitally signed
    EEproms

    Simply connect the mainboard to the UPA programmer directly or by using a DB9 male / female extension cable (1:1). Insert the correct config key into the slot of the mainboard and start programming either via the ZIF or SOIC Socket. You can also use the included DIL to 10pin Flat-ribbon header, put it inside the ZIF socket and wire up an SOIC clip or clamps for ISP use from there.

    Motorola MCU's

    Pick the Adapter you want to use, attach the flat cable to the Adapter (PIN1 is always indicated, on both the cable and also the Adapter) and also to the main board's 10pin ISP connector. Select the VCC supply source by the jumper on the mainboard next to the ISP connector (on = target supplied from upa, off = target got own supply). Slide the Adapter over the soldered PLCC MCU on the target PCB. (No soldering, no pinout reviewing, no pin counting, saves lots of time and hassle and let's you make your job faster, precise and easier)

    Once your workshop is equipped with our Adapter Set you will have a all new UPA Experience.

    STMicroelectronics ST62*:

    ST6240, ST6245, ST6249

    NSC CR16*: CR16HCS5(9), CR16MCS5(9), CR16MES5(9), CR16MFS5(9), CR16MCT5/9, CR16HCT5/9

    Motorola HC05*: MC68HC05B6, MC68HC05B8, MC68HC05B16, MC68HC705B16, MC68HC05B32, MC68HC05E6, MC68HC705E6, MC68HC05H12, MC68HC05L28, MC68HC05P3, MC68HC705P3*, MC68HC05X16, MC68HC05X32

    Motorola HC08*: MC68HC08AS20, MC68HC08AS32, MC68HC08AS60, MC68HC08AZ32, MC68HC(9)08AZ32A, MC68HC908AZ60, MC68HC908AZ60A

    Motorola HC11*: MC68HC11A1, MC68HC11A8, MC68HC11E9, MC68HC11EA9, MC68HC11E20, MC68HC11F1, MC68HC11K4, MC68HC11KA2, MC68HC11KA4, MC68HC11KG4, MC68HC11KS2, MC68HC11KS8, MC68HC11L6, MC68HC11P2, MC68HC11PA8, MC68HC11PH8

    Motorola HC12*: MC68HC912B32, MC68HC912BE32, MC68HC912D60, MC68HC912D60A, MC68HC912DC128A, MC68HC912DG128, MC68HC912DG128A

    Motorola HCS12*: MC9S12D64, MC9S12A128, MC9S12DG128, MC9S12DG256, MC9S12H128, MC9S12H256

    Atmel 8051 Architecture: AT89S51, AT89S52, AT89S53, AT89S8252, AT89S8253

    Atmel AVR 8-Bit Risk: AT90S1200, AT90S2313, AT90S2323, AT90S2333, AT90S2343, AT90S4433, AT90S4434, AT90S8515, AT90S8535, ATmega8, ATmega16, ATmega161, ATmega162, ATmega163, ATmega323, ATmega64, ATmega103, ATmega128, ATtiny12, ATtiny15, ATtiny2313

    Microchip PIC12: PIC12F508, PIC12F509, PIC12F629, PIC12F675

    Microchip PIC16: PIC16F627(A), PIC16F628(A), PIC16F648A, PIC16F72, PIC16F73, PIC16F74, PIC16F76, PIC16F77, PIC16F818, PIC16F819, PIC16F83, PIC16F84(A), PIC16F870, PIC16F871, PIC16F872, PIC16F873(A), PIC16F874(A), PIC16F876(A), PIC16F877(A)

    EEPROMs I2C: 24C01, 24C02, 24C04, 24C08, 24C16, 24C32, 24C64, 24C65, 24C128, 24C256, 24C512, 85C72, 85C82, 85C92, BAW574252, GRM-003, GRM-004, GRM-005, KKZ-06F, MCM2814, PCA8581, PCF8581, PCF8582, PCF8594, PCF8598, PCF85102, PCF85116, SDA2516, SDA2526, SDA2546, X24C00, X24C01

    EEPROMs Microwire: 7002, 93C06, 93C14, 93C46, 93C56, 93C57, 93C66, 93C76, 93C86, 93S46, 93S56, 93S66, GRN-001, GRO-002, KKZ-01, S220, S2914, ST61907, XLS93C46

    EEPROMs SPI: M35080, 25C010, 25C020, 25C040, 25C080, 25C128, 25C160, 25C256, 25C320, 25C640, M25P05, M25P10, M25P20, M25P40, M25P80, ST95010, ST95020, ST95040, ST95080, ST95160, ST95320, ST95640, ST95P02, ST95P04, ST95P08, X5043, X5045

    EEPROMs Miscellaneous: CXK1011, CXK1012, CXK1013, M6M80011, M6M80021, M6M80041, SDE2506, TC89101, TC89102

    *EEPROM Only

    NEC ..uDP780828A uDP780948 uDP780949 uDP780973 uDP780974

    TMS...TMS370CX02 TMS370CX32 TMS370CX36 TMS370CX42 TMS370CX56 TMS370CX56 TMS370CX56 78K0/HC912

    TMS370CX58 TMS370CX58 78K0/HC912 TMS375C006



    Package List:
    1pcXMain unit
    1pcXUSB cable
    1pcXCD
    1pcX5pin cable
    1pcXAdapter Type1 Per eprom I2C,SPI, Microware e M35080
    1pcXAdapter Type2 Motorola MC68HC11P2+MC68HC11PH8-PLCC84
    1pcXAdapter Type3 Motorola MC68HC08AS-PLCC52
    1pcXAdapter Type4 Motorola MC68HC11KA2/4+MC68HC11KS-PLCC68
    1pcXAdapter Type5 Motorola MC68HC(9)08-QFP64
    1pcXAdapter Type6 Motorola MC68HC11F1-PLCC68
    1pcXAdapter Type7 Motorola MC68HC05H12-PLCC52
    1pcXAdapter Type8 Motorola MC68HC11K-PLCC84
    1pcXAdapter Type9 Motorola MC68HC11A8/E1/E9/E20+MC68HC11EA9-PLCC52
    1pcXAdapter Type10 Motorola MC68HC11KA2/4+MC68HC11PA8-QFP64
    1pcXAdapter Type11 Motorola MC68HC11K-QFP80
    1pcXAdapter Type12 Extended address
    1pcXAdapter Type13 Motorola MC68HC11A8/E1/E9/E20-QFP64
    1pcXAdapter Type14 Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC705B16/B32-PLCC52
    1pcXAdapter Type15 Motorola MC68HC(7)05E6-SOIC28
    1pcXAdapter Type16 Motorola MC68HC05B4/B6/B8/B16/B32+MC68HC(7)05X16/X32-QFP64
    1pcXAdapter Type17 Motorola MC68HC(9)12B32-MC68HC(9)12D60(A)-QFP80
    1pcXAdapter Type18 Motorola MC68HC11F1-QFP80
    1pcXAdapter Type19 Motorola MC68HC11L6-PLCC68

       อยากเสียเงิน... ไปที่นี่
    สวัสดีคุณ...ผู้เยี่ยมชม  กด ❤ ถูกใจโพสท์นี้ หรือยัง...
    ต้องการสมัครสมาชิก VIP สมัครได้ที่นี่...   หรือทาง Line ID: k.sonchai

    V1.3 UPA USB Programmer English With Full Adaptors With Nec Function
    « ตอบกลับ #1 เมื่อ: 01 กุมภาพันธ์ 2560, 20:16:24 »