ข่าวประชาสัมพันธ์

มาร่วมเป็นกำลังใจให้เว็บด้วยการสมัครสมาชิกวีไอพี ~~ เลือกปีที่ท่านต้องการได้โดยไม่ต้องเรียงปี ~~ ปีละ 350 บาท สมัคร 2 ปีลดเหลือ 600 บาท ~~ มีไลน์กลุ่ม VIP จำนวนหลายร้อยท่าน เอาไว้ปรึกษางานซ่อม ~~ เข้าถึงข้อมูลด้านเทคนิค ข้อมูลเชิงลึกมากมาย.....


ผู้เขียน หัวข้อ: เมื่อกุญแจที่มีชิป...หาย ซูบารุ  (อ่าน 943 ครั้ง)

0 สมาชิก และ 1 บุคคลทั่วไป กำลังดูหัวข้อนี้

ออฟไลน์ Auto Man

  • Administrator
  • หัวหน้าศูนย์ซ่อมสร้าง
  • *
  • เจ้าของกระทู้
  • Joined: ก.ย. 2558
  • กระทู้: 37146
  • สมาชิกลำดับที่ : 1
  • เพศ: ชาย
  • มือผู้ให้ย่อมสูงกว่ามือผู้รับ
    • เว็บชุมชนคนรักช่างยนต์
    • อีเมล์
เมื่อกุญแจที่มีชิป...หาย ซูบารุ
« เมื่อ: 17 พฤษภาคม 2561, 16:04:02 »
  • ขึ้นบน
  • ลงล่าง
  • SUBARU Forester Smart key adapting method for all key lost tutorial
    Preface:


    We all knows SUBARU spare parts is very expensive, all key lost will cost a lot, here we share the SUBARU Forester key
    adapting method for all key lost.

    Abstract:
    SUBARU Smart key all key lost key adaption have two common methods:
    1. Disassemble the SMT Main ECU, Use AD900 programmer to write data into Toyota smart key, it can directly start the car, No need adapting on the car again, but must use AD smart key.
    2. Disassemble the SMT Main ECU, immobilizer(ESL/ELV), Write initialization data, then study the key on the car.
    Here we share the second method, SUBARU Forester use 5290 smart key, Year 2013, No immobilizer, disassemble the SMT Main ECU and ELV Write initialization data and study the key.



    Process:
    1. Get the ELV(below steer column), disassemble the ELV module, find the 8 PIN EEPROMon the circuit board, Model No. : 93c46.
    Desoldering the 93c46, use programmer and adapter read the data, make a backup first then change the code shown as below picture.
    -keep the Red marked code code the same, others all change to F, When dump revised, use programmer and adapter write back to 93c46 eeprom, and solder back to the circuit board.
    2. Disassemble the SMT Smart ECU(back side of the A column of the car), it’s appearance is the same as Toyota except the LOGO, disassemble the shell find the 8 PIN eeprom near the CPU, EEPROM Model No. : 93C86. Disassemble the 93c86, Write initialization data, assemble back to the car, if without error the dashboard could be light up.
    3. Use Key programmer add new keys directly. Use K518, X300, or I80 key programmer, connect the car OBD interface, select SUBARU, then XV smart system, direct add new key, all down, after the keys added, no need sync, directly start the car.
    สวัสดีคุณ...ผู้เยี่ยมชม  กด ❤ ถูกใจโพสท์นี้ หรือยัง...
    ต้องการสมัครสมาชิก VIP สมัครได้ที่นี่...   หรือทาง Line ID: k.sonchai

    เมื่อกุญแจที่มีชิป...หาย ซูบารุ
    « เมื่อ: 17 พฤษภาคม 2561, 16:04:02 »