หมวดวิศวกรรม/เทคโนโลยียานยนต์ => ระบบเบรก => ห้องเครื่องล่างยานยนต์ => เครื่องล่าง/ส่งกำลัง/ไฟฟ้ายานยนต์ => ระบบเบรก ABS => ข้อความที่เริ่มโดย: Auto Man ที่ 10 มกราคม 2563, 07:31:14

หัวข้อ: ABS Renault Megane 2 Wiring
เริ่มหัวข้อโดย: Auto Man ที่ 10 มกราคม 2563, 07:31:14
   ABS Renault Megane 2 Wiring 

ตรงนี้มีภาพ! แต่ท่านจะมองไม่เห็น , ท่านต้อง  สมัครสมาชิก หรือ ลงชื่อเข้าระบบ
 (http://upic.me/show/62567949)

Anyway here is ABS simple schematic and connector from Megane 2 / 2003 (without ESP or ASR)

118 is ABS unit

150 is Right rear wheel sensor

151 is Left rear wheel sensor

152 is Left front wheel sensor

153 is Right front wheel sensor

Pin 1 and 4 - negative power

Pin 2 and 3 - positive power

Pin 12 - ignition switched power

Pin 11 is diagnostic K Line (to OBD pin 7)

Pin 20 is brake pedal switch

Pin 23 is output of pulse analogic road speed signal (used by Radio, Navigation etc)

Pin 26 and 15 - CAN BUS (first connected to UPC module)

ตรงนี้มีภาพ! แต่ท่านจะมองไม่เห็น , ท่านต้อง  สมัครสมาชิก หรือ ลงชื่อเข้าระบบ
 (http://upic.me/show/62567947)

ตรงนี้มีภาพ! แต่ท่านจะมองไม่เห็น , ท่านต้อง  สมัครสมาชิก หรือ ลงชื่อเข้าระบบ
 (http://upic.me/show/62567948)