The Tech-2 is the same tester GM Technicians use to diagnose GM vehicles.
The Vetronix Tech 2 comes with Authentic GM software and provides support for
on-board diagnostics on all GM systems 1992 thru 2010.
Features:1.Authentic GM software in the Tech 2 Flash means the most comprehensive
diagnostic software available for late model GM vehicles.
2.Support for on-board diagnostics on all GM systems 1992 thru current year.
3.Removable hardware modules provide insurance against scan tool obsolescence.
4.Large, easy-to-read backlit screen.
5.RS232 & RS485 ports provide the avenue to connect future devices to your Tech 2 Flash.
6.Ability to capture stored DTCs, Freeze Frame, and Failure Record for later review.
7.Ability to view the status of vehicle diagnostic tests as they run.
8.Bi-directional The authentic GM 1992-current year software will provide full bi-directional
control when performing power train, chassis, and body diagnostics.
9.Vetronix Tech 2 Specifications
10.Dimensions: 12
11.Microprocessor: 32 bit, 16 MHz
12.Memory: 32 MB flash type II PCMCIA. Type III slot available for future expansion.
13.Communications: Integral RS232 communication port.
14.Screen: 3.8.8 backlit monochrome with full graphics capability: 320*40 pixels.
Displays up to 9 vehicle parameters at once .Download Tech2 Brochure (5.2 Mb)
An industry change in protocol from OBD II to Controller Area Network (CAN) has begun.
In order to perform diagnostics on a vehicle that uses the CAN interface; you will need the
Tech 2 Flash and a CAN diagnostic interface module. The module connects between the
Tech 2 Flashs diagnostic link cable and the OBD adapter. Once the module is connected,
it can be used on all GM vehicle applications, even those vehicles using other platforms
such as OBD I and OBD II.