Replacement & Repair
If you are facing signal loss, you can troubleshoot or replace the distributor:
1. Check for Oil: Remove the distributor cap, rotor, and the plastic inner shield to check for
oil contamination on the optical disk.
2. Test the Wires: Use a multimeter or an automotive scanner (like a Consult-II) while cranking to
verify the ECU is receiving the 180° (DTC 11) and 1° signals.
3. Replacement Options: If the optical sensor or ignition coil is completely dead, the most reliable fix
is swapping the whole assembly. You can browse replacement units or parts on platforms like Amazon or eBay
แปลไทยได้ประมาณนี้
"การเปลี่ยนและการซ่อมแซม หากคุณประสบปัญหาการสูญเสียสัญญาณ คุณสามารถแก้ไขปัญหาหรือเปลี่ยนตัวจ่ายไฟได้ดังนี้:
1. ตรวจสอบน้ำมัน: ถอดฝาครอบตัวจ่ายไฟ โรเตอร์ และแผ่นป้องกันพลาสติกด้านในออกเพื่อตรวจสอบการปนเปื้อนของน้ำมัน
บนแผ่นดิสก์ออปติคอล
2. ทดสอบสายไฟ: ใช้มัลติมิเตอร์หรือเครื่องสแกนรถยนต์ (เช่น Consult-II) ขณะสตาร์ทเครื่องยนต์เพื่อตรวจสอบว่า ECU
ได้รับสัญญาณ 180° (DTC 11) และ 1° หรือไม่
3. ตัวเลือกการเปลี่ยน: หากเซ็นเซอร์ออปติคอลหรือคอยล์จุดระเบิดเสียอย่างสมบูรณ์ วิธีแก้ไขที่เชื่อถือได้มากที่สุดคือการเปลี่ยนชุดประกอบทั้งหมด
คุณสามารถค้นหาหน่วยหรือชิ้นส่วนทดแทนได้บนแพลตฟอร์มต่างๆ เช่น Amazon หรือ eBay